User Tools

Site Tools


gateway_node_hardware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
gateway_node_hardware [2022/11/09 10:39] – created glengateway_node_hardware [2022/11/11 11:22] (current) – [Hardware Comparison] glen
Line 1: Line 1:
 ====== Gateway Node Hardware ====== ====== Gateway Node Hardware ======
  
 +Requirements for the gateway node hardware:
 +
 +  * Run from wall power
 +  * Persistent state
 +  * Discover network link to the Internet
 +  * Internet connectivity via WiFi or cellular (through external modules if needed)
 +  * Receive system configuration data from the Internet and self configure (zero touch from fresh powerup)
 +  * I/O sufficient to allow for double duty as a data collection node
 +  * Linux OS to allow flexibility in feature set
 +  * Local storage sufficient to buffer data collection in the event of link outages
 +
 +===== Hardware Comparison =====
 +
 +
 +^ Board ^ Cost ^ RAM ^ Flash ^ Net ^ IO ^ Dev Tools ^
 +| [[https://www.sparkfun.com/products/14643|Raspberry Pi 3 B+]] | $35.00 | 1GB | microSD | 802.11 | 4xUSBA \\ 27 GPIO \\ I2C \\ SPI \\ UART \\ | RPI Linux |
  
gateway_node_hardware.1667990365.txt.gz · Last modified: 2022/11/09 10:39 by glen